Keeping Your Printer Heads Clean
It is essential that you maintain clean printer heads. Cleaning them prevents the ink from getting clogged into the nozzles of your printer, and also reduces the amount of smudges you might get from the ink on your prints. When dealing with HP and Lexmark printers, this is of the utmost importance since they are not advanced in auto cleaning features.
It is very simple to clean the printer heads. You are going to need to remove the cartridges and clean the heads gently using a cotton cloth that has been dipped in a small amount of water. It is not recommended that you use alcohol or tissues to clean the printer heads, you could run the risk of creating serious damage which is something that you don’t want to happen.
Before you replace your printer cartridge you need to make sure that the print heads have been completely dried out. Just this small step will help you to increase the lifespan of your printer as well as the quality of your print jobs.
Don’t Allow Your Printer Ink To Dry Up
There are so many printer owners who complain about the quality of their prints when they have not operated the printer for several months. The trick is to try and use your printer on the regular basis so that you can prevent the ink from drying up. This will keep your printer ink in the best condition. You should consider using both color and black and white prints on the weekly basis so that the ink does not just dry up.
Watch Out For Printer Jams
If you have a paper jam you need to take caution. You don’t want to force the paper out or it could cause a lot of damage to your printer. Instead you should look at your user manual or check the manufacturer’s site to see how you can go about getting out the paper jam with ease. For the most part, HP printers are equipped with a hatch on the back that can easily be removed. Once removed you can easily see the paper wheels and can remove the paper that has been jammed in the printer.
Turn Off The Printer Properly
When you are not using your printer you should turn it off. This too can prevent the ink from drying out and also helps to keep the printer operating in an orderly fashion. You should always use the power button to turn off your printer, and if you wish you can also unplug the machine. You should never try and turn off the printer while you’re in the middle of the job as this could cause a jam or other problems.
Watch How You Clean Your Printer
If your printer comes with ink clean software or installed on the hardware you want to complete this once and not several times in a row. Cleaning it constantly can do more harm than good in this case. You should clean the encoder strip on the monthly basis. When your ink is low you should immediately replace it to prevent the ink from sitting on the printer head and nozzles, which will increase the life of your printer.